Degradation Of Organic Pollutants Research Articles

Solar-driven Bi6O5(OH)3(NO3)5(H2O)3/Bi2WO6 heterojunction for efficient degradation of organic pollutants: Insights into adsorption mechanism, charge transfer and degradation pathway

Actualizing controllable construction of efficient heterojunction nanocomposites remains a challenge in the field of photocatalytic water remediation, which can be got over through exploiting in-situ attachment approaches between different semiconductors. Based on this, we successfully fabricated a unique separable Z-scheme Bi6O5(OH)3(NO3)5(H2O)3/Bi2WO6 (BON/BW) nanoflowers by an in-situ growth strategy. The profitable photogenerated carriers transfer mediated by Z-scheme heterojunction greatly accelerated the generation of •O2– and •OH. The strong adsorption of 4-nitrophenols (4-NP) with parallel configuration on side Bi2WO6 in BON/BW nanocomposites also provides great convenience for subsequent degradation steps. By optimizing multiple steps in the photocatalytic reaction process, BON/BW showed far superior photodegradation performance compared to single components. The causes and consequences of 4-NP photodegradation were explored through LC-MS tests, theoretical calculations, and toxicity analysis, and a green and safe degradation pathway was proposed. More experiments have confirmed that the synthesized BON/BW composites also have excellent degradation ability against other pollutants under sunlight, demonstrating excellent universality. With any luck, the logical design of heterojunction photocatalysts for effective photocatalytic water remediation should be aided by this study.

Ag‐Based Bimetallic Nanoparticles for the Catalytic Reduction of Nitrophenol and Organic Dyes: An Overview

AbstractBimetallic nanoparticles with synergistic effects revealed much higher catalytic activity than respective monometallic materials. This review describes bimetallic nanoparticles, especially silver nanoparticles, combined with the other transition elements, such as Ag−Fe, Ag−Co, Ag−Ni, and Ag−Cu, as an enhanced catalytically active material. The coverage is given to the various methods of preparation, in which factors responsible for different structures of bimetallic nanoparticles are thoroughly discussed. Lastly, we explore the use of bimetallic nanoparticles as a catalyst for the degradation of numerous organic pollutants that contribute to water pollution.

Efficient electro-Fenton degradation of organic pollutants via the synergistic effect of 1O2 and •OH generated on single Fe[sbnd]N4 sites

The electro-Fenton with in situ generated 1O2 and •OH is a promising method for the degradation of micropollutants. However, its application is hindered by the lack of catalysts that can efficiently generate 1O2 and •OH from electrochemical oxygen reduction. Herein, N-doped stacked carbon nanosheets supported Fe single atoms (Fe-NSC) with FeN4 sites were designed for simultaneous generation of 1O2 and •OH to enhance electro-Fenton degradation. Due to the synergistic effect of 1O2 and •OH, a variety of contaminants (phenol, 2,4-dichlorophenol, sulfamethoxazole, atrazine and bisphenol A) were efficiently degraded with high kinetic constants of 0.037–0.071 min−1 by the electro-Fenton with Fe-NSC as cathode (−0.6 V vs Ag/AgCl, pH 6). Moreover, the superior performance for electro-Fenton degradation was well maintained in a wide pH range from 3 to 10 even with interference of various inorganic salt ions. It was found that FeN4 sites with pyridinic N coordination were responsible for its good performance for electro-Fenton degradation. Its 1O2 yield was higher than •OH yield, and the contribution of 1O2 was more significant than •OH for pollutant degradation.

A sustainable electrochemical strategy utilizing pulsed alternating current and dual carbon felt electrodes for enhanced degradation of organic pollutants: Oxidation performance and mechanisms

In this work, a novel electrochemical (EC) oxidation system utilizing pulsed alternating current (PAC) and dual carbon felt (CF) electrodes has been established for sustainable degradation of sulfamethoxazole (SMX) with no addition of extra oxidant. The EC/PAC system showed high degradation efficiency and energy efficiency compared to the pulsed direct current (PDC) and direct current (DC) systems. The EC/PAC process was effective across a wide pH range of 3–11 for SMX removal. The results showed that the 1O2 confined to the CF electrode surface was the dominant oxidative specie that was generated from dissolved oxygen in the system. Under PAC conditions, the cathode and anode were rapidly switched on the same CF electrode, increasing the generation of 1O2 for enhanced SMX oxidation. Furthermore, the EC/PAC system demonstrated resistance to interference from various anions of different concentration levels found in natural environment. In contrast to the EC/PDC system, the EC/PAC system emerged as a promising option for more efficient H2O2 production. High-resolution mass spectrometry results revealed the SMX degradation pathways and byproducts, which were then evaluated for toxicity removal. Overall, the EC/PAC system offers a green and sustainable solution to future wastewater treatment, with high degradation rates, energy efficiency, and sustainability.

Tailoring the surface functional groups of biochar for enhanced adsorption and degradation of pharmaceutically active compounds

In this study, orange peel biochar (OPBC) was synthesized through a pyrolysis process. Decoration with two specific functional groups (i.e., –COOH and NH2) was performed through a ball milling-assisted modification process to yield the respective biochars (i.e., OPBC-COOH and OPBC-NH2). Both OPBC-COOH and OPBC-NH2 demonstrated excellent adsorption capacities for sulfamethoxazole (SMX) and carbamazepine (CBZ), and hydrogen bonding between the pharmaceuticals and BCs followed the primary adsorption mechanism. In addition, both OPBC-COOH and OPBC-NH2 (0.3 g/L) exhibited high degradation efficiencies for SMX (10 mg/L, 87 %; 92 %) and CBZ (10 mg/L, 73 %; 83 %) when peroxymonosulfate (PMS, 1 mM) was present. The scavenging experiments confirmed that electron transfer and radical/non-radical pathways (·OH and 1O2) are mainly responsible for the degradation of SMX and CBZ, respectively. It was also proven that the oxygen- and nitrogen-containing surface functional groups on BC are important for activating PMS for the degradation of organic pollutants. These findings provide new insights into the effects of functional groups on BC for the degradation of contaminants of emerging concern.

Amorphous nitrogen-doped carbon layers forming the interfacial channel for rapid charge transfer in ZnIn2S4/BiVO4 Z-scheme photocatalyst for enhancing organic pollutants degradation with simultaneous hydrogen evolution

Efficient photocatalytic hydrogen evolution from the organic wastewater represents an ideal solution for simultaneously addressing energy shortages and environmental pollution. However, the sluggish transport of photogenerated carriers at contact interface poses a key obstacle to enhancing photocatalytic activity. Here, ZnIn2S4/BiVO4@N-C (ZIS/BVO@N-C) Z-scheme photocatalysts were successfully constructed by a simple hydrothermal-impregnation method. ZIS/BVO@N-C-10% demonstrated outstanding photocatalytic performance, achieving a hydrogen evolution rate of 2695.68 μmol·g−1·h−1 and a degradation rate of 492.96 mmol·g−1·h−1 under visible light, surpassing those of ZIS (851.52 μmol·g−1·h−1 and 174.83 mmol·g−1·h−1) and ZIS/BVO-10% (1228.98 μmol·g−1·h−1 and 277.78 mmol·g−1·h−1). Characterization results and density functional theory (DFT) calculations revealed that the introduction of the N-C layer reduced interfacial impedance and enhanced the strength of interfacial electric field, overcoming the interfacial barrier and improving the photogenerated separation and migration efficiency at the interface, and ultimately enhancing the photocatalytic activity of ZIS/BVO@N-C. Based on experimental and characterization results, the photocatalytic mechanism of ZIS/BVO@N-C Z-scheme has been proposed. Furthermore, ZIS/BVO@N-C exhibited excellent stability, highlighting its potential for practical applications. This work also presents a new strategy for designing highly active Z-scheme photocatalysts for organic wastewater treatment and simultaneous hydrogen energy recovery.

A flexible self-cleaning/antibacterial PVDF/T-ZnO fabric based on piezo-photocatalytic coupling effect for smart mask

A novel flexible composite fabric has been engineered by combining piezoelectric poly (vinylidene fluoride) (PVDF) and tetrapod zinc oxide (T-ZnO) nanostructures, which are integrated onto a nonwoven fabric substrate. This fabric exhibits a wide array of functionalities, notably self-cleaning and antibacterial properties, facilitated by the synergistic piezo-photocatalytic coupling effect. Through the utilization of the piezoelectric effect inherent in PVDF/T-ZnO in tandem with the photocatalytic attributes of T-ZnO nanostructures, the fabric achieves concurrent degradation of organic pollutants and antibacterial efficacy when exposed to mechanical vibration and solar irradiation. The piezo-photocatalytic coupling effect engenders an internal electric field that aids in the effective separation of photo-generated carriers (electrons and holes), thereby diminishing recombination rates and augmenting the efficiency of the photocatalytic degradation process. Notably, organic pollutants such as methylene blue and azithromycin exhibit degradation levels of 96.0% and 92.6%, respectively, within a timeframe of 25 and 60 min. The incorporation of PVDF/T-ZnO results in an approximate 40% enhancement in the degradation rate of organic substances compared to the use of T-ZnO in isolation. Furthermore, the composite fabric showcases exceptional antibacterial efficacy, effectively inhibiting the proliferation of Staphylococcus aureus. Experimental findings reveal that the average antibacterial zone diameter of the PVDF/T-ZnO fabric measures at 7.68 mm, significantly surpassing that of the T-ZnO fabric and nonwoven fabric. Given its remarkable self-cleaning and antibacterial attributes, the PVDF/T-ZnO fabric exhibits substantial potential for diverse applications, including the development of intelligent masks tailored for deployment in healthcare settings and polluted environments.

Two-step synthesis of coconut shell biochar-based ternary composite to efficiently remove organic pollutants by photocatalytic degradation

Designing environmentally friendly, low cost and efficient photocatalysts is vitally important for degradation of organic pollutants. Herein, a ternary composite-ZnO/ACSC@TiO2, constituted by activated coconut shell derived biochar (ACSC), TiO2 and ZnO, was successfully synthesized by two-step hydrothermal method. It demonstrated that TiO2 could be uniformly wrapped on ACSC surface during first step to form core-shell structures (ACSC@TiO2). It was beneficial not only to enhance adsorption capacity for organic pollutants and absorption ability for light, but also to form C-doped TiO2 with a relatively narrow bandgap to expand light absorption of TiO2 from UV to visible light. Subsequently, ZnO was introduced through second step to generate type-II heterojunctions with ACSC@TiO2, which further reduced bandgap value of the ternary photocatalyst to promote photogenerated carrier generation and efficiently diminished recombination of e--h+ pairs. As expected, the optimal prepared catalyst with 10 wt% of ZnO (10%ZnO/ACSC@TiO2) exhibited excellent adsorptive and photocatalytic abilities for removal of tetracycline (TC) and Rhodamine B (RhB) with different initial concentrations. Particularly, its total removal efficiency for TC and RhB was 97.6% and 99.4%, respectively under 300 W xenon lamp irradiation (25 mg/L of organic pollutants, 1.0 g/L catalyst and natural pH in 60 min). Investigations on catalytic mechanism and degradation pathways proved that 10%ZnO/ACSC@TiO2 could remove RhB and TC by deep degradation. Its enhanced synergy of adsorption and photocatalysis could efficiently accelerate mineralization rates of RhB and TC. This biomass derived biochar-based ternary composite as photocatalyst with optimized energy band structures and microstructures would have good industrial application potential.

Preparation, characterization, and photocatalytic performance of atmospheric plasma-sprayed TiO2/Al2O3 coatings on glass substrates

Conventional methods for wastewater treatment are not always efficient in persistent organic pollutant degradation processes. Therefore, low-cost and effective methods of their removal from sewage are constantly sought. This study presents an attempt to fabricate thermally sprayed ceramic coatings on glass and their characterization. Granulation of TiO2, Al2O3, and their blends in different mass ratios was done. Assessment of actual density and specific surface area was performed, and TiO2, Al2O3, and TiO2/Al2O3 were then used as a coating material for the deposition on glass substrates in atmospheric plasma spraying. Surface analysis of coatings was done by evaluating their roughness and wettability. Both powder and coatings samples were characterized using the X-ray diffraction method and scanning electron microscopy. The photocatalytic activity was estimated in the Eosin Y degradation process under UV light. UV–Vis spectroscopy was applied to observe the changes in the dye concentration. Additional tests for color measurements before and after photodegradation were carried out using a sphere spectrophotometer in CIELab color space. Particle size distribution was examined for the powder samples after the granulation and d50 was stated at 48.42–63.28 µm. Characterization of coatings via roughness measurements showed the average roughness of a surface equal to 4.90–9.65 µm. Moreover, most of the coatings appeared to be hydrophobic with water contact angles between 100° and 130°. All of the coatings showed Eosin Y degradation ability and the highest efficiency was reached for 100T/C, A75T/C, and A50T/C samples and stated at 71%, 62%, and 51%, respectively.Graphical abstract

Freezing-enhanced degradation of azo dyes in the chloride-peroxymonosulfate system

In this study, we investigated the freezing-induced acceleration of dye bleaching by chloride-activated peroxymonosulfate (PMS). It has been observed that the oxidation of chloride by PMS generates a free chlorine species, such as hypochlorous acid (HOCl), under mild acidic and circumneutral pH condition. This process is the major reason for the enhanced oxidation capacity for electron-rich organic compounds (e.g., phenol) in the chloride-PMS system. However, we demonstrated that the chloride-PMS system clearly reduced the total organic carbon concentration (TOC), whereas the HOCl system did not lead to decrease in TOC. Overall, the chemical reaction is negligible in an aqueous condition if the concentrations of reagents are low, and freezing the solution accelerates the degradation of dye pollutants remarkably. Most notably, the pseudo-first order kinetic rate constant for acid orange 7 (AO7) degradation is approximately 0.252 h−1 with 0.5 mM PMS, 1 mM NaCl, initial pH 3, and a freezing temperature of −20 °C. AO7 degradation is not observed when the solution is not frozen. According to a confocal Raman-microscope analysis and an experiment that used an extremely high dose of reactants, the freeze concentration effect is the main reason for the acceleration phenomenon. Because the freezing phenomenon is spontaneous at high latitudes and at mid-latitudes in winter, and the chloride is ubiquitous elsewhere, the frozen chloride-PMS system has potential as a method for energy-free and eco-friendly technology for the degradation of organic pollutants in cold environments.

Activation of peracetic acid by a magnetic biochar-ferrospinel AFe2O4 (A = Cu, Co, or Mn) nanocomposite for the degradation of carbamazepine − A comparative and mechanistic study

Peracetic acid (PAA)-based advanced oxidation processes (AOPs) are promising technologies for the efficient treatment of persistent contaminants in wastewater. In this study, three different magnetic biochar (BC)-ferrospinel AFe2O4 (A = Cu, Co, or Mn) nanocomposites were synthesized through a combined sol–gel/pyrolysis process for the activation of PAA to degrade carbamazepine (CBZ). The following order of efficiency was observed for CBZ degradation in the presence of PAA: BC-CoFe2O4 (100 %) > BC-MnFe2O4 (7 %) ≈ BC-CuFe2O4 (7 %). In addition, 0.8 mM PAA, 0.3 g/L catalyst, nearly neutral pH, and 333 K were identified as the optimal operating parameters for the degradation of 1 mg/L CBZ in the BC-CoFe2O4/PAA system. Mechanistic studies revealed that CH3C(O)OO radicals are the dominant active species for the degradation of CBZ in the BC-CoFe2O4/PAA system, and the continuous conversion of Co(II) to Co(III) in this system is responsible for the generation of these radicals. In addition, the water matrices (e.g., humic acid (20 mg/L), NaCl (0.05 M), and NaNO3 (0.01 M)) played negligible roles in the degradation of CBZ in the BC-CoFe2O4/PAA system. This system exhibited highly selective and reactive degradation of organic pollutants with electron-rich groups (e.g., CBZ (0.36 min−1), sulfamethoxazole (0.12 min−1), and diclofenac (0.28 min−1)). Furthermore, the degradation products of CBZ were identified, and possible degradation pathways and toxicity of these transformation products were proposed. The BC-CoFe2O4/PAA system demonstrated outstanding degradation performance in dynamic systems and real wastewater treatment applications. This study describes the performance of an efficient and easy-to-separate catalyst for the activation of PAA. This study facilitates the development and application of PAA-based AOPs for wastewater treatment.

Iron coupled with hydroxylamine turns on the “switch” for free radical degradation of organic pollutants under high pH conditions

Reducing iron by hydroxylamine (HA) can promote the generation of reactive oxygen species (ROS) in the Fenton reaction and play a crucial role in the degradation of organic pollutants. However, the performance of this system at wider environmental thresholds is still not sufficiently understood, especially in the highly alkaline environments resulting from human activities. Here, we assessed the impact of solution pH on organic pollutant degradation by goethite with the addition of HA and H2O2. The solid phase variation and ROS generation were analyzed using Mössbauer spectroscopy, X-ray absorption near edge structure spectroscopy, and electron paramagnetic resonance analysis. This study found that under alkaline conditions, the system can continuously scavenge organic pollutants through oxygen-mediated generation of free radicals. At lower pH levels, organic pollutant decomposition, exemplified by the breakdown of bisphenol A (BPA), is primarily driven by the Fenton reaction facilitated by iron. As pH increases, hydroxyl radical (•OH) production decreases, accompanied by decreased BPA removal efficiency. However, the removal efficiency of BPA increased significantly at pH > 9. At pH 12, the removal of BPA exceeded that of the acidic condition after one hour, which is consistent with observations in soil system studies. Unlike the Fenton reaction, which is not sensitive to oxygen content, the removal of BPA under alkaline conditions occurs only under aerobic conditions·H2O2 is hardly involved in the reaction, and the depletion of HA becomes a critical factor in the decomposition of BPA. Importantly, in contrast to acidic conditions, where the dramatic decomposition of BPA occurs mainly in the first 10 min, the decomposition of BPA under alkaline conditions continued to occur over the 2 h of observation until complete removal. For natural systems, the remediation of pollutants depends more on the active time of ROS than on their reactivity. Therefore, this idea can reference pollution remediation strategies in anthropogenically disturbed environments.

Surface-enhanced Raman scattering spectroscopy monitoring and degradation of organic pollutants using a novel nanowire

A multifunctional Ag/AlOOH nanowires (ANW) composite substrate was constructed, which not only accomplishes highly sensitive detection of organic dye molecules, but also has excellent performance in the degradation of pollutants. The ANW in the Ag/ANW substrate possesses a high aspect ratio, which extends the distribution area of Ag and enables a large number of hot spots on the active substrate. Additionally, due to the abundant OH groups on the ANW, there is an increased number of anchor sites for adsorbed metal ions in the Ag/ANW compound, thus contributing to the enhancement and degradation of molecules. Moreover, the constructed multifunctional Ag/ANW nanocomplexes also show great promise for practical applications, providing a reference for the detection and degradation of contaminants.

Construction of a novel Cu2(OH)3F/Cu2O n-p heterojunction by in-situ reduction: photo-Fenton-like synergistic promotion of efficient Cu2+/Cu+ cycling

Cu-based Fenton-like systems have demonstrated high effectiveness in the degradation of organic pollutants, however, challenges still exist to overcome the sluggish cycling of metal ions and fast activation of reactants. Herein, a novel n-p type Cu2(OH)3F/Cu2O photo-Fenton-like catalyst (CFC) was prepared with in-situ reduction of Cu2(OH)3F and applied for tetracycline hydrochloride degradation. Under optimized condition, the target catalyst (CFC-5) showed excellent activity, achieving a degradation efficiency of approximately 99.93 % in 30 min. The reaction rate constant with CFC-5 was 4.10 and 3.26 times higher than that of Cu2(OH)3F and Cu2O, respectively. Moreover, the Cu2(OH)3F/Cu2O catalyst exhibited highly cycling stability and broad applicability. The results illustrate that construction of Cu2(OH)3F/Cu2O composites facilitates the charge separation and enhances Cu2+/Cu+ cycling, which benefits the generation of highly oxidizing active species and thus significantly improved the degradation efficiency. Besides, this study offers a versatile method to construct inexpensive and efficient photo-Fenton-like heterojunction catalysts.

Boosting visible-light-promoted photodegradation of norfloxacin by S-doped g-C3N4 grafted by NiS as robust photocatalytic heterojunctions

As a result of industrial expansion and ill-considered exploitation of resources, serious environmental issues have recently emerged that have led to damage to the ecosystem. In particular, antibiotics, such as norfloxacin (NOR) have emerged as highly hazardous contaminants resulting from the increased use of these drugs worldwide. Photocatalysis-based degradation using heterojunctions has become almost the only way to permanently and eco-friendly degrade these pollutants. Herein, noble metal-free nanohybrids composed of S-doped g-C3N4 grafted by NiS (denoted as NiS/SCN) have been fabricated via hydrothermal and one-step polymerization (at 550 °C) procedures. The photocatalytic activity of 3%NiS/SCN photocatalyst was almost 6- and 20-times as high as SCN and NiS, respectively, achieving 96.2% NOR degradation within 90 min. The recommended photocarriers transfer pathway was suggested and supported experimentally. Considerably, loading a small amount of NiS cocatalyst over S-doped g-C3N4 boosted performance in addition to efficient reusability. This increased photocatalytic activity can be attributed to the fact that doping g-C3N4 with sulfur can reduce the bandgap and thus broaden the response range to visible-light, and the effective effect of Schottky junction can significantly improve the separation rate of electron-hole pairs. Accordingly, the constructed NiS/SCN nanocomposites are potential candidates for photocatalysis processes, particularly visible-light-induced degradation of organic pollutants.

Boosting peroxymonosulfate activation over partial Zn-substituted Co3O4 for florfenicol degradation: Insights into catalytic performance, degradation mechanism and routes

Florfenicol (FLO) is a broad-spectrum halogenated antibiotic (containing F and Cl atoms), and the discharged FLO in wastewater exhibits potential biotoxicity. Peroxymonosulfate (PMS) activation can generate reactive oxygen species (ROSs) to realize efficient degradation of organic pollutants. Herein, Zn-substituted Co3O4 (ZnxCo) catalysts were prepared and applied in PMS activation for FLO degradation. The physicochemical properties were systematically studied by combining experiments and density functional theory (DFT) calculation. The Zn partial substitution induced electron rearrangement and promoted oxygen vacancy (OV) formation in Co3O4. Zn0.03Co catalyst exhibited superior FLO removal, achieving a higher reaction rate of 0.112 min−1 than Co3O4 (0.053 min−1). The FLO degradation was highly dependent on the factors of PMS/Zn0.03Co/FLO dosage, temperature, initial pH, and coexisting inorganic anions. The Zn0.03Co also displayed outstanding performance in PMS activation for degradation of various typical organic pollutants. Electron paramagnetic resonance (EPR) spectra and quenching experiments indicated that both radical species (·OH, SO4·-, and ·O2-) and nonradical species (1O2) contribute to FLO removal. The redox cycle of Co3+/Co2+ and OVs played an essential role in PMS activation. The electron structure of FLO and parameters of PMS adsorbed on ZnxCo were calculated. The longer length of CoO and OO bonds for the adsorbed PMS could enhance its activation to generate ROSs. The intermediates were detected, and five degradation pathways were proposed. The acute and chronic toxicities of intermediates suggested that the dechlorination process is important for the toxicity attenuation of FLO. This study clarified the performance enhancement mechanism of Zn substitution on FLO degradation by PMS activation using Co3O4 based catalyst, which favors the development of PMS-based advanced oxidation processes for wastewater treatment.

Efficient visible light catalytic degradation of toxic organic pollution by hollow urchin-like TiO2@g-C3N4/GQDs composite

In order to expand the photoresponsive spectrum of TiO2 and improve its catalytic activity under visible light, the hollow urchin-like composites of TiO2@g-C3N4/GQDs (TCN/GQDs) with a core-shell structure heterojunction was synthesized through a hydrothermal method and calcination. Potassium titanium oxalate, melamine, and citric acid were utilized as the raw materials for this synthesis process. The TCN/GQDs composites were subjected to a range of analyses to examine their microstructure and photoelectric properties. The findings indicated that the synthesized composites effectively enhanced the absorption spectrum of TiO2 in the visible light range by creating the stable heterojunctions among TiO2, g-C3N4 and GQDs. Additionally, the ability of these composites to degrade toxic organic pollutants under visible light was studied by using several different organic dyes and antibiotics. The results demonstrated that the TCN/GQDs composites exhibited efficient visible light catalytic degradation capability on organic pollutants, and the degradation efficiency could approach to 100 % under visible light in a short time. Furthermore, the photocatalyst exhibited hardly change of degradation efficiency towards organic pollutants even after 5 cycles of testing, suggesting its commendable performance in visible light catalysis and potential for repeated utilization.

Cellulose-based materials in tailoring a novel defective titanium‑carbon‑phosphorus hybrid composites for highly efficient photocatalytic activity

Until now, black titania has attracted much interest as a potential photocatalyst. In this contribution, we report the first demonstration of the effective strategy to fundamentally improve the photocatalytic performance using a novel sustainable defective titanium‑carbon-phosphorous (TCPH) hybrid nanocomposite. The prepared TCPH was used for photocatalytic degradation of the main organic pollutants, which is methyl orange (MO) dye. The physico-chemical properties of as-prepared samples were characterized by various techniques to observe the transformations after carbonization and the interaction between different composite phases. The existence of Ti+3 and oxygen vacancies at the surface, and a notable increase in surface area, are all demonstrated by TCPH, together with the distinct core-shell structure. These unique properties exhibit excellent photocatalytic performance due to the boosted charge transport and separation. The highest degradation efficiency of methyl orange (MO) was attained in the case of TCPH when compared with titanium-cellulose-phosphorous (TCeP) and titanium‑carbon-phosphorous (TCPN). Accordingly, the highest degradation efficiency was achieved by applying the optimal operational conditions of 1 g/L of TCPH catalyst, 10 mg/L of MO, pH of 7 and the temperature at 25 ± 3 °C after 3 min under LED lamp (365 nm) with light intensity 100 mW/cm2. The degradation mechanism was investigated, and the trapping tests showed the dominance of hydroxyl radicals in the degradation of MO. TCPH showed high stability under a long period of operation in five consecutive cycles, which renders the highly promising on an industrial scale. The fabrication of highly active defective titanium‑carbon-phosphorous opens new opportunities in various areas, including water splitting, and CO2 reduction.

Pomelo peel biomass derived highly active advanced-oxidation-process catalyst: Complete elimination of organic pollutants

The advanced oxidation process (AOPs) is playing an important role in the elimination of hazardous organic pollutants, but the development of inexpensive and highly active advanced catalysts is facing challenges. In this study, a low-cost and readily available agricultural waste resource pomelo peel-flesh (PPF) biomass was used as the basic raw material, and the uniformly dispersed small cobalt nanoparticles were effectively anchored in the biochar derived from pomelo peel-flesh (BDPPF) by impregnation adsorption/complexation combined with heat treatment. Co/BDPPF (BDPPF embedded with Co) can effectively activate peroxymonosulfate (PMS) to SO4·-, ·OH and 1O2 reactive oxygen species, and achieve nearly 100% degradation of tetracycline persistent organic pollutant. Co/BDPPF can not only degrade tetracycline efficiently in complex water environment, but also degrade most organic pollutants universally, and has long-term stability, which solves the problem of poor universality and stability of heterogeneous catalysts to a certain extent. Importantly, Co/BDPPF derived from waste biomass was also innovatively designed as the core of an integrated continuous purification device to achieve continuous purification of organic wastewater. In this study, agricultural waste resources were selected as biomass raw materials to achieve efficient capture of Co2+, and finally developed advanced AOPs catalyst with excellent performance to achieve the purification of organic wastewater. It also provides a promising solution for the preparation of simple, low-cost, large-scale production of AOPs catalysts that can be put into actual production.

High-concentration hydrogen peroxide production by solar interfacial catalysis

Solar-driven catalytic synthesis of H2O2 is an ideal alternative to the anthraquinone method, but current photocatalysts still suffer from low activity and inefficient solar energy utilization. Here we presented an economic and efficient solar interfacial catalysis system (SICS) that incorporated photothermal–photocatalytic materials into commercial sponge to simultaneously generate the required heat and carriers for H2O2 production. We demonstrated its superiority over conventional particulate photocatalysis (PC) in photocatalytic H2O2 production. The SICS, located at the air–water interface, remarkably improve the activities of photocatalysts by efficient utilization of solar-converted heat. The produced H2O2 from SICS was reserved in the sponge and resulted in an ultrahigh concentration of 46 mM for per gram catalyst after 1 h solar irradiation. As thus, our application experiments confirmed that the SICS presented great advantages in organic pollutant (e.g. phenol and tetracycline) degradation compared with conventional PC. This work paves a new way for the industrialization of solar-driven catalysis.